Code Classes and Master Electricians Exam Review
There are plenty of classes out there for continuing education, training and code up date. I have a few here you can look forward to when available.


I have been an instructor at Gwinnett Tech for over ten years. The most successful course I've taught is The Masters Electricians Exam Review. Course (CED 0938A). This course prepares you to take the State Electrical Licenses Exam for restricted and unrestricted classes. Most students ask me what is the average passing in my class, and I say 100% of the best. Through my experience as an instructor, I have learned that everyone that comes to class are not ready for a State licenses. I would ask a simple question like “what article does grounding fall up under”, and their reply is “I don't remember", or "I'm not sure, is that a new code section?” That's like asking a surgeon what color is blood and he hadn't studied that part yet. So how can you give a true account? I have seen other instructors make statements like, “I have a 95% passing average”. How does he know? The only way to know for sure is they call you and you tell you that they passed, or you find out from the state yourself. Are these instructors boasting for ratings or they always get the perfect students? Some students can't read, add, or subtract and have problems with decimals.................. Any questions?

 
Here is a list of classes being held at Gwinnett Technical College for the Gwinnett Technical College

Click below
To register                                                                     WINTER 2010
Course #
Course Name
Date

Day
Time
Cost
Instructor
063CED0077A
Basic Electricity
Jan 9 / Feb. 8
M-W
6:00 to 10:00 PM
$500.00
Unknown
063CED0078A
Basic Electronics
Feb. 13 / Mar 15
M-W
6:00 to 10:00 PM
$500.00
Unknown
063CED0933A
Commercial Wiring
To be announced
M-W
6:00 to 9:30 PM
$500.00
Unknown
To be announced
TU-TH
5:30 to 9:00 PM
$500.00
none
Jan 13 / Mar 10
TU-TH
5:00 to 8:30 PM
$500.00
Low Voltage Contractor License Exam Preparation
Feb. 27 / Mar 24
M-W
6:00 to 10:00 PM
$500.00
Bill Frazier
104SEM0058
Continuing Education
4 Hours
Sat
8:00 AM to 12:00 PM
$70.00
                                                      See the names of my students who passed the test










 
Here is a list of classes being held at Gwinnett Technical College for the Gwinnett Technical College

Click below
To register                                                                     SPRING 2010
Course #
Course Name
Date

Day
Time
Cost
Instructor
Basic Electricity
To be announced
M-W
6:00 to 10:00 PM
$500.00
Unknown
074CED0078A
Basic Electronics
To be announced
M-W
6:00 to 10:00 PM
$500.00
Unknown
074CED0933A
Commercial Wiring
To be announced
M-W
6:00 to 9:30 PM
$500.00
Unknown
To be announced
SAT
8:00 AM to 3:30 PM
$500.00
May 11 / July 1
TU-TH
5:00 to 8:30 PM
$500.00
Low Voltage Contractor License Exam Preparation
Apr 12 / Jun 07
Mon
6:00 to 10:00 PM
$500.00
Bill Frazier
104SEM0058
Continuing Education
4 Hours
Sat
8:00 AM to 12:00 PM
$70.00
                                                     See the names of my students who passed the test











 
Here is a list of classes being held at Gwinnett Technical College for the Gwinnett Technical College

Click below
To register                                                                     SUMMER 2010
Course #
Course Name
Date

Day
Time
Cost
Instructor
Basic Electricity
To be announced
M-W
6:00 to 10:00 PM
$500.00
Unknown
Basic Electronics
To be announced
TU-TH
6:00 to 10:00 PM
$500.00
Unknown
Commercial Wiring
To be announced
M-W
6:00 to 9:30 PM
$500.00
Unknown
To be announced
Sat
8:00 to 3:30 PM
$500.00
To be announced
TU-TH
5:00 to 8:30 PM
$500.00
Low Voltage Contractor License Exam Preparation
To be announced
Mon
6:00 to 10:00 PM
$500.00
Bill Frazier
104SEM0058
Continuing Education
4 Hours
Sat
8:00 AM to 12:00 PM
$70.00
                                                     See the names of my students who passed the test











 
Here is a list of classes being held at Gwinnett Technical College for the Gwinnett Technical College

Click below
To register                                                                      FALL 2010
Course #
Course Name
Date

Day
Time
Cost
Instructor
Basic Electricity
To be announced
M-W
6:00 to 10:00 PM
$500.00
Unknown
Residential House Wiring
To be announced
TU-TH
6:00 to 9:30 PM
$500.00
Unknown
Commercial Wiring
To be announced
M-W
6:00 to 9:30 PM
$500.00
Unknown
To be announced
Sat
8:00 to 3:30 PM
$500.00
Aug 10 / Sept 21
M-TH
5:00 to 10:30 PM
$500.00
Low Voltage Contractor License Exam Preparation
To be announced
Mon
6:00 to 10:00 PM
$500.00
Bill Frazier
104SEM0058
Continuing Education
4 Hours
Sat
8:00 AM to 12:00 PM
$70.00
                                                     See the names of my students who passed the test

 
To copy or download an application for continuing education, (1) click on the links above (2) click on the "Course #" to the left of your class name (3) click on "Add to Enrollment Card" and follow instructions.
For other information: www.GwinnettTechnicalCollege.com.

Do you want to know in advanced about Seminars & Continuing Education Classes?
click here and follow the instructions.


 
Understanding the National Electrical Code Instructor: To be announced

This course is designed for journeyman and helpers that are just coming out of the field with hands on knowledge of the electrical code and want the knowledge of understanding the NEC, but are not quite ready for the challenge of being a Master Electrical Contractor. This course will cover how to read the code, grounding, service installation, motor introduction, transformers and code interpretation. This course should be taken before taking the Master Electrician Exam Review.

Required material: 2008 National Electrical Code (NFPA 70)
                                          Calculator
                                          Ugly's electrical references










 
Master Electrician Exam Review Instructor: Ed Stubbs

Become the most sought after Electrical Contractor around. This course is designed to help individuals become Master Electrical Contractor (restricted or unrestricted, single phase and three phase), by providing classroom instructions and practical exercises on the major subject areas covered by the state exam. Some subjects included in this course are how to read the code (extensive coverage), fault current calculations, grounding and bonding, service calculations, motor calculations, transformer calculations and taps, and the helpful input of my former students who took the test and passed the state exam. Also included in the course will be information concerning workman's compensation, rules and regulations, employer's tax guide, and unemployment insurance. Home work is a must. Are you ready?

Required material: 2008 National Electrical Code (NFPA 70)
            Calculator
            Ugly's electrical references
            Business and Project Management for Contractors - Georgia Construction Industry
            licensing Board Edition,
            Employer's Tax Guide, Circular E, 2010
            More references
Back to top